Click Supervisor System Hardware. If needed reboot the RPi to get the USB serial port. See the official docs. Add some code to your configuration.yaml. The following code adds the RFlink integration and sets it to auto remember any RF signals it receives. Devices that are sensors (eg Oregon Scientific weather station) will be set as sensor entities. Hereby, Oregon Scientific, declares that USB Bluetooth Smart Dongle (model: AD932) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.
An Oregon Scientific Weather Station is designed to be a simple, accurate and affordable home weather station which includes features like atomic time, temperature readings and humidity to provide your current local weather conditions.
Our modern wireless weather stations transmit weather information from wireless sensors to a weatherstation display. Home Climate Control Monitors indicate the comfort level of multiple locations in your home or outdoors and come equipped with wireless sensors to provide remote temperature and humidity readings. Weather Forecasters assist the user with a look into the local weather ahead to better prepare for the day.
If you require more information from a personal weather station to satisfy your curiosity, check out the Oregon Scientific Professional Weather Station which include temperature and humidity sensors and also measure rainfall, provide accurate wind speed and direction, barometric pressure, and UV index from the outdoor sensors. Additionally the Oregon Scientific connected weather stations, wifi weather stations and bluetooth thermometers send weather sensor information to the Oregon Scientific mobile app available on an Apple or Android devices.
The best weather station for the weather enthusiast is an Oregon Scientific Weather Station.
Now with hawdware support for multiple weather station vendors
- WxShield for Arduino
- AcuRite 02032C
- Radio Shack 63-256
- Oregon Scientific WMR88, WMR100, WMR200, RMS300
Download Now
Try the new Stable Release
Latest BETA
Version 5.3.6.1 is now the current stable release.
Version 5.6.0.0 is the current beta release.
News -- New stable release!
Beta 5.6.0 adds weather forecast and 1-hour rain, fixes bugs.
Click on the link above for the latest on new releases and other developments.
Full-size Image
WSDL FAQs
See here for some frequently asked questions. This page will be updated periodically to include common questions about WSDL.
WSDL Weather Shield for Arduino
Click here to find out more about this capability that was released in version 4.2 of WSDL. The remaining stock of version 2 shields is now available at a discounted price!
Goals
This free weather data logging application is focused on the following objectives:
- Collection and archiving of accurate weather data.
- Display of weather data as 2-dimensional plots.
- Uploading weather data to internet weather sites.
- Generation and upload of web pages containing real-time weather data.
- Support of Oregon Scientific weather consoles (WMR88, WMR100, WMR200 and others).
- Support of the Arduino WxShield weather data receiver.
Overview
This Windows application will display and log weather data obtained through a USB connection to the Oregon Scientific WMR88, WMR100, WMR200 and RMS300 weather stations. It also supports the WxShield reciever for Oregon Scientific wireless sensors. You will find features here for a wide range of users, from novices, to experts. The extensive user manual describes program features in detail and includes informative discussions on many topics.
The display includes most of the data available on the console, analysis of wind and temperature data plus graphs of temperature, pressure, wind and rain over varying periods of time. Data is also logged to a CSV file with options for automatic backup and trimming. Daily extremes can be extracted from the log file and written to a separate CSV file. Data upload to Weather Underground and CWOP is supported. Web pages can be generated and uploaded to web servers through FTP.
The current stable version is 4.4. WSDL is now under development again. The best method for submitting comments, bugs and feature requests is via the SourceForge OpenDiscussion for WSDL, here.
Screen Shot of Version 4.7.0
Full-size Image
Users with the version 2 Arduino WxShield will also get this signal strength readout for their wireless sensors:
Features
This application is designed to work with the indoor console receiving multiple outdoor temperature and humidity sensors and with or without the optional UV sensor. The following data is accepted from Oregon Scientific weather station consoles:
- Temperature/humidity from the base unit and all wireless sensors.
- Current wind speed and direction.
- Average wind speed.
- Station pressure and altitude-corrected pressure.
- Current rainfall rate.
- Rainfall amount for the current hour and past 24 hours.
- Total rain since the last reset, and the date/time of the reset.
- Station clock setting & synchronization status with radio signal.
- Battery status (OK or Low) for console, rain bucket and anemometer.
- Wireless sensor signal strength (version 2 WxShield users only).
- UV reading.
- Optional WeatherJack barometer or the WxShield can be used for higher resolution pressure readings.
WSDL can now handle the maximum number of external wireless temperature/humidity sensors. Custom names can be provided for each sensor and graph colors can be user-defined. WxShield users can configure up to 20 wireless sensors.
Up to 16 graphs can be displayed at one time, and each graph can display a different type of data and/or different set of sensors. Graph setups can be saved for later recall; you can create setups for different kinds of weather -- storms, heat waves and so on.
Data processing on the raw console data yields the following additional information:
- 15-minute rate of change for temperature and dew point (indoor and outdoor).
- 1-minute summary of wind data -- average and peak gust.
- Wind data processed according to METAR standards. Note: This DOES NOT mean you can legally use this software to produce offical aviation METARs.
- Peak wind gust over the past hour.
- 3-hour altitude-corrected (aka sea level) pressure rate of change.
- Removal of atmospheric tides from barometer data (most useful with higher resolution barometer data such as from WeatherJack or the WxShield).
The CSV-format log file is updated once a minute with the following information:
- Station and altitude-corrected pressure.
- 1-minute peak wind gust and direction.
- 1-minute average wind and direction.
- Rain rate and total rain since reset.
- UV reading.
- Temperature, dew point and relative humidity for all sensors.
Data can be periodically transferred to any of the following internet weather providers:
Web pages can also be created from templates and uploaded to a web server via FTP. Up to 16 PNG graphs can be created for upload, independent of the graphs displayed in the main window.
Users can generate a CSV summary file containing daily extremes of all data currently in the log file.
Drivers Oregon Scientific Usb Devices Pc Camera
An options dialog allows the user to configure units used for display and in the CSV log file. Many aspects of automatic log file backup and trimming are also configurable.
Options Dialog
Additional Features
- Rain gauge maintenance setting ignores accidental bucket tips during cleaning or other maintenance of rain gauge.
- Graphs can be periodically saved as PNG images and uploaded via FTP to a web server.
- Up to 16 different graphs PNG images can be generated for upload, independent of graphs shown in main window. Upload can be through WSDL or use your own FTP client application.
- Webcam images may be captured and uploaded via FTP.
- Several calibration (tweaking) options for your sensors including the rain gage and temperature and humidity sensors. Rainfall amount (but not rain rate) can optionally be measured by counting rain bucket tips instead of using the rainfall numbers from the rain gage. There is also an option to compute sea level pressure inside the program, replacing the weather station value.
X10 Plug-In Project Started
SourceForge user 'jroal' has created a Google Code project for a WSDL plug-in that can operate with X10 devices. The X10 home automation system has been around a long time now and can control home appliances by sending signals through household wiring and also provides wireless capabilities. An introduction to X10 can be found here:
The Google Code project for the plug-in is here:
RF Protocols
A new document is available now that describes the RF signals transmitted by OS wireless sensors. This document covers all known versions (1.0, 2.1 and 3.0) of these RF protocols. It also documents some RF protocols of Acu-Rite brand wireless sensors.
Download
Checksums for release files are available on the software notes page below.