Schneider Electric Bourguebus Port Devices Driver

29-03-2021
 |  [RAND-100] - Comments

>PLCs >Digital Electronics Corporation General Ethernet Driver

Novatel wireless motherboards driver download for windows 10. Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ('SEJH') shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Download

Note:

→ Precautions for adding a new driver onto Windows Vista/7
→ Precautions for adding a new driver at Daylight Saving Time

TitleDigital Electronics Corporation General Ethernet Driver
VersionVer. 1.11.02
File NameDIG_GENE.exe
File Size785KB
Applicable SoftwareGP-Pro EX Ver. 1.10.000 or later
Pro-Server EX Ver. 1.10.000 or later
You can check your version by 'Help' function -> 'Version Info'.
Related Devices
  • Ethernet device that the communication procedure is easy
Related Units
  • GP3000 Series
Device/PLC Connection ManualFor details, please read the following
PDF:dig_gene.pdf ( 541KB )
For general information regarding Device connection and documentation conventions, please refer to 'Device/PLC Connection Manual'.
Updated ContentsVer. 1.11.02 (Nov. 12, 2009)
The following issues were corrected:
  • The source port number destination cannot be switched between the Memory table and U/I destinations in some cases.
  • CPU utilization may become 100% when the driver is used with WinGP.
  • In the offline mode, different numbers can be set as the local Port No. in the Communication Settings and the Control Area 1 settings.
  • A number smaller than 1024 can be set as the local port number in the offline mode of Middle-size display units.
  • GP-Pro EX may look as if it were locked up when an out-of-range value is input in the Control Area Setting dialog.
  • An error occurs when a command is sent with the Attribute Bit2, Bit3, and Bit4 ON.
  • Opening the connection may lead to an error when the port number auto-allocation setting is enabled.
  • A warning dialog may be displayed twice when an out-of-range value is input in the Control Area Setting dialog.

Installation (This file is self-extracting.)

  1. Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  2. Click on the above file name to download the data to desired folder.
  3. After the download to your PC is finished, double-click on the file’s icon to start the installer program.
  4. After the installer starts, follow the instructions given on each screen.
  5. After installation, execute GP-Pro EX.
  6. After installation, click on the Device/PLC area’s [Digital Electronics Corporation.] selection and select [General Ethernet].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to 'Device/PLC Connection Manual'.

Update History:

Oem port devices driver download. [Ver. 1.11.02] (Nov. 12, 2009)

The following issues were corrected:
  • The source port number destination cannot be switched between the Memory table and U/I destinations in some cases.
  • CPU utilization may become 100% when the driver is used with WinGP.
  • In the offline mode, different numbers can be set as the local Port No. in the Communication Settings and the Control Area 1 settings.
  • A number smaller than 1024 can be set as the local port number in the offline mode of Middle-size display units.
  • GP-Pro EX may look as if it were locked up when an out-of-range value is input in the Control Area Setting dialog.
  • An error occurs when a command is sent with the Attribute Bit2, Bit3, and Bit4 ON.
  • Opening the connection may lead to an error when the port number auto-allocation setting is enabled.
  • A warning dialog may be displayed twice when an out-of-range value is input in the Control Area Setting dialog.

[Ver. 1.11.01] (Jun. 8, 2009)

The following settings were added:
  • Up to 8 port numbers on a GP unit can be selected.
  • Support for Device Monitor.

[Ver. 1.10.01] (May. 12, 2008)

The following issues were corrected:
  • The command is not transmitted.
  • When DPI setting of Windows OS is 120 DPI, Contorl Area Settings dialog is not normally displayed.
  • When write to system area, display takes time till the value reflects in screen.

Last Updated : Nov. 12, 2009
Posted :May. 12, 2008

| Return to Top || Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.

Schneider electric bourguebus port devices driver ed

With over 25 years' experience in data acquisition from different sources, and hundreds of drivers to choose from, PcVue Solutions data acquisition layer (called also CIMWAY®) is the foundation of our real-time data infrastructure.
CIMWAY® offers a large range of scalable driver solutions for collecting data from automation devices. Communication is managed through a robust platform that supports a collection of standards drivers for Schneider Electric, Siemens, Rockwell, Mitsubishi, Wago,…. A driver development kit is also available for our customers to develop their own driver and obviously driver development is ongoing and new drivers are added continuously by our R&D team.

INTERFACEDRIVER VERSION
S - Serial port
E - Ethernet port
Mb - Manufacturer board
N/S - Not Significant		Mo - Molex
O - OPC Server
H - Hilscher adapter		Native - Integrated in PcVue
Act - Activated on order
ManufacturerProtocol/EquipmentInterfaceRequirementVersion
ABBSPA-BUSSNative
ALSTOMESP GEM 80SNative
ALSTOMESP Gemlan-T TCP/IPENative
ALSTOMEthernet SRTPMoPCU2000ETH
ALSTOMEthernet SRTP for C80-75 & C80-35OSW1000ETH
ALSTOMEthernet SRTP for C80-75 & C80-35 Time stampedENative
ALSTOMNbus ASCII / RTUMoPCI1000/2000/4000 PCU1000
ALSTOMSNP-XMoPCI1000/2000/4000 PCU1000
ALSTOMSNP-X for C80-75 & C80-35OSW1000SER
ALSTOMTime stamped NbusOSW1000SER
BACnet - ASHRAEBACnet/IP client - BTL certified Profile B-AWSENative - Act
BACnet - ASHRAEBACnet/IP server - Profile B-ASCE
BECKHOFFTwinCat over TCP/IPETwinCat ADSNative
CERBERUSCERLOOPMoPCI1000/2000/4000 PCU1000
CITILOGIP-CitilogENative
COMMEND SACommend OPC ServerO
COMMEND SAICXENative - Act
CROUZETCBUSSNative
DNP USER GROUPDNP3 Master stationENative - Act
ECHELONLONMbLCA Object ServerNative
ECHELONLONENL220, LonMakerNative
EIBOPC EIBOEIBA Server
ELSAG BAILEYData LinkMoPCI1000/2000/4000 PCU1000
EMERSONDeltaV (DCS)ODeltaV OPC Server
FISHERROC protocol for Roc 300 Series, FloBoss 407 & 500 SeriesSNative
GE FANUCEthernet SRTPMoPCU2000ETH
GE FANUCEthernet SRTP for 90-70 & 90-30 Series Time stampedENative
GE FANUCSNP-XMoPCI1000/2000/4000 PCU1000
GE FANUCSNP-X for 90-70 & 90-30OSW1000SER or KEPServer
GenericSQL driverENative - Act
Generic GPS protocolStandard NMEA supported (GPPPA,GPGLL,GPGSA,GPGSV,GPRMC,GPVTG)SNative
HILSCHERMPI for Siemens S7-300 & S7-400 via EthernetHNetlink Adapter for MPINative - Act
HITACHIEX8000 - MLC 8000 systemENB : Ethernet TCP/IP Client & UDP ServerNative
HONEYWELLHC9000 EthernetOKEPServer
HONEYWELLPLANTSCAPE/EXPERION (DCS)OExperion OPC ServerNative
HONEYWELLUDC EthernetOKEPServer
HONEYWELLUDC SerialOKEPServer
IECIEC 60870-5-104 MasterENative - Act
IECIEC 60870-5-104 OutstationENative - Act
IECIEC 61850 Client - DNV-GL certifiedENative - Act
JOHNSON CONTROLSN2OPEN (Optomux)ONT9100 OPC Server
JOHNSON CONTROLSOptomux N2 for DX9100 & DC9100SDX & DC SeriesNative
JUMOJUMO_ASCIISNative
JUMOJUMO_JBUSSNative
KEPWAREAll supported protocolsOFor the complete list of supported protocols visit www.kepware.com
KERLINKLoRaENative - Act
KNXENative - Act
KROHNEBM100 BUSSNative
KROHNEBM100 PTPSNative
LANDIS&GYRNRU/NRKSNirmo gatewayNative
LEGRAND / BTICINOOpenSCSENative
LSISIP-XGTE
MATRIXPUPSNative
MATSUSHITAMewtocolSNative
MATSUSHITAMewtocol IPENative
MICROSOFTDDE clientN/SNative
MITSUBISHIFX 485SNative
MITSUBISHIFX-SeriesSNative
MITSUBISHIMelsec A-SeriesSNative
MITSUBISHIMelsec TCP/IP for A and Q SeriesENative
MTTME1000ERioTcplib.dll Librairy - Please contact MTT
MOELLERSucomAMoPCI1000/2000/4000 PCU1000
MOELLERSucomAOSW1000SER or KEPServer
MOLEXAll supported protocolsOFor the complete list of supported protocols visit www.molex.com (Network Interface Card)
MOXAMoxa ioLogik - Support controllers in the E1200 & E2500 seriesENative
MQTTMQTT - PublisherENative - Act
MQTTMQTT - SubscriberENative - Act
MULTITECHLoRaENative - Act
NAPAQXFLOW (RIO), TBCODevIO OPC Server
NATIONAL INSTRUMENTOptomux for FieldPoint and Compact FieldPointOOPC FIELD POINT SERVER
ODVACIPOSW1000ETH or KEPServer
OMRONAll OMRON protocolsOCX Server OPC or KEPServer
OMRONFINS TCPMoPCU2000ETH
OMRONFINS TCP for OMRON C, CV and CS seriesOSW1000ETH
OMRONSYSMAC-WAYSNative
OMRONSYSMAC-WAYMoPCI1000/2000/4000
OPC FoundationOPC-UA DA ServerN/SNative - Act
OPC FoundationOPC-UA DA ClientN/SNative - Act
OPC FoundationOPC-DA clientN/SNative
OPC FoundationOPC-DA ServerN/SNative
OPC FoundationOPC-XML DA clientN/SNative
OPTO22OptomuxSJohnson Controls DX 9100Native
PERAXP200,P400,P16ODevIO
PERAXPerax time stampedSARLEQUIN ConcentratorNative
PHOENIX CONTACTInterBus SOInterBus OPC Server
PROFIBUSAll messaging FMS / DP / FDL / S5 / S7 / MPIMoPCI1500PFB/2000PFB PCU1500PFB
PROFIBUSS7 / MPI onlyMoPCI1500S7 PCU1500S7 PCU1000PFB
QUADLOGAPACS M-BUSOAPACS OPC Server
ROCKWELL AUTOMATIONAll Allen Bradley protocolsORSLinx OEM or KEPServer
ROCKWELL AUTOMATIONDF1MoPCI1000/2000/4000 PCU1000
ROCKWELL AUTOMATIONDF1 / DH+ / EtherNet/IP etc.Mb/E/SRSLinx OEMNative
ROCKWELL AUTOMATIONDF1 peer to peer for SLC500 Serie onlySNative
ROCKWELL AUTOMATIONEtherNet/IP for PLC-5, SLC-500 and Logix 5000MoPCU2000ETH
ROCKWELL AUTOMATIONEtherNet/IP for Logix5000 access (CompactLogix, ControlLogix,DriveLogix and FlexLogix controllers)ENative - Act
SAIA BURGESS CONTROLSEther-S-NetENative
SAIA BURGESS CONTROLSS-NetSNative
SAUTERNovaNetSSauter OPC Server + ActiveX TimeTable
SCHNEIDER ELECTRICEthwayMoPCU2000ETH
SCHNEIDER ELECTRICModbus ASCII /RTU Slave Time stamped ModbusMoPCI1000/2000/4000 PCU1000
SCHNEIDER ELECTRICModbus ASCII /RTU Slave Time stamped ModbusOSW1000SER
SCHNEIDER ELECTRICModbus Master ASCII / RTU Time stamped ModbusSNative
SCHNEIDER ELECTRICModbus+MbNative
SCHNEIDER ELECTRICOpen Modbus TCP/IP Master Time stamped ModbusENative
SCHNEIDER ELECTRICOpen Modbus TCP/IP SlaveENative
SCHNEIDER ELECTRICEthwayOSchneider OFS OPC Server (time stamped not supported)
SCHNEIDER ELECTRICUni-TE TCP/IPMoPCU2000ETH
SCHNEIDER ELECTRICUni-TE TCP/IPOSW1000ETH
SCHNEIDER ELECTRICUni-TE TCP/IPOSchneider OFS OPC Server
SCHNEIDER ELECTRICUnitelway SlaveSClient SlaveNative
SCHNEIDER ELECTRICUnitelway SlaveMoPCI1000/2000/4000 PCU1000
SCHNEIDER ELECTRICUnitelway SlaveOSW1000SER
SCHNEIDER ELECTRICUnitelway SlaveOSchneider OFS OPC Server
SIEMENS3964 / 3964R, RK512 messaging via CP524 / 525SNative
SIEMENSAll messaging Profibus FMS / DP / FDL / MPI / PPI+ / PPIMoPCI1500PFB/2000PFB PCU1500PFB
SIEMENSAS511MoPCI1000/2000/4000 PCU1000
SIEMENSAS511 for S5 serie programming portOSW1000SER
SIEMENSIndustrial Ethernet ISO on TCP for S5 and TIMoPCU2000ETH
SIEMENSIndustrial Ethernet ISO on TCP for S5 and TIOSW1000ETH (H1 not supported)
SIEMENSIndustrial Ethernet ISO on TCP for S7ENative
SIEMENSIndustrial Ethernet TCP (Fetch / Write messaging) for S7-300 & 400ENative
SIEMENSS7 / MPIHNetlink (NL MPI, NT 40 MPI, NT50 MPI for ISO)Native - Act
SIEMENSS7 PPIESiemens USB/RS Multi-Master cable
SIEMENSSinec H1OSimatic Net or Matrikon
SIEMENSTI-DirectMoPCI1000/2000/4000 PCU1000
SIEMENSTI-Direct for TI505 serie programming portOSW1000SER
SIEMENS VideoIP Camera with: CCIS1337-LP/CFVA-IP/CVVA-IPOSIEMENS MK8000 OPC Server
SIEMENS VideoSIMATRIXOSIEMENS MK8000 OPC Server
SIEMENS VideoSISTORE AX/CX/MX (NVS included)/MXpro/SX recorder (DVRs)OSIEMENS MK8000 OPC Server
SIEMENS VideoTELSCAN (Video Web Server)OSIEMENS MK8000 OPC Server
SIEMENS Access controlCerPass CC30 Controller (SiPass connection)OSIEMENS MK8000 OPC Server
SIEMENS Access controlSiPassOSIEMENS MK8000 OPC Server
SIEMENS Fire DetectionCC60 GazOSIEMENS MK8000 OPC Server
SIEMENS Fire DetectionCS11 AlgoRexOSIEMENS MK8000 OPC Server
SIEMENS Fire DetectionCS1115OSIEMENS MK8000 OPC Server
SIEMENS Fire DetectionCZ10OSIEMENS MK8000 OPC Server
SIEMENS Fire DetectionFS20 Sinteso/FS720 Cerberus PROOSIEMENS MK8000 OPC Server
SIEMENS Fire DetectionSTT11 CMSIOSIEMENS MK8000 OPC Server
SIEMENS Fire DetectionSTT20 CMSIOSIEMENS MK8000 OPC Server
SIEMENS Fire DetectionSTT2410 CMSIOSIEMENS MK8000 OPC Server
SIEMENS Intrusion detectionCS4OSIEMENS MK8000 OPC Server
SIEMENS Intrusion detectionCS440OSIEMENS MK8000 OPC Server
SIEMENS Intrusion detectionCS6 Guarto (NK822x configuration and connection)OSIEMENS MK8000 OPC Server
SIEMENS Intrusion detectionCZ12OSIEMENS MK8000 OPC Server
SIEMENS Intrusion detectionSI410/420OSIEMENS MK8000 OPC Server
SNMPSNMP Manager V1, V2C and V3ENative - Act
SNMPSNMP AgentENative - Act
SOFRELS50, S500ODevIO OPC Server
SOFRELSofbus-PCSCS100 ConcentratorNative
SOFRELSofbus-PL, Lacbus-RTU, SMS for S500,LS,Box,S50OSoftrel OPC Server
TBOXSemaphore LT50, LP300, CLASSICODevIO OPC Server
TRENDIQ2, IQ3ODevIO OPC Server
TYCOIP POSMEPOSM XPro Video SystemNative
WAGOModbus ASCII / RTUPlease refer to the Schneider entry
WAGOOPEN COM (Open Modbus)Please refer to the Schneider entry
WAGOProfibus FMS / DP / FDLPlease refer to the Siemens or Profibus entry
WITTRS IIOPC Pilot
WITTRS II for WIT Force, Clip, Easy, TwinYODevIO OPC Server
YOKOGAWAEthernet TCP/IP for FA-M serieENative
YOKOGAWASerial protocol for FA-M serieSNative
YOKOGAWASTARDOM PLCODAC OPC Server
Devices

Schneider Electric Bourguebus Port Devices Driver

The Configure the local gateway. Command is available in the contextual menu if a gateway entry is selected in the Communication Settings tab. The command opens the Gateway Configuration dialog box, where you can configure the block driver for the local gateway. This is an alternative way to manually editing the configuration file gateway.cfg. Nanodac™ Recorder / Controller The ultimate in graphical recording combined with PID control and setpoint programs The nanodac™ recorder/controller offers the ultimate in graphical recording combined with PID control for a box of its size. The compact ¼ DIN panel mount unit offers four high accuracy universal inputs for data recording and PID control. This secure data recording device.